Exterior Painting & Staining

We take pride in our craftsmanship.  We realize preparation, protection as well as application are all equally vital to the quality and longevity of each job. 

 

Exterior Painting Preparation and Procedures:

 

• Pressure washing of the house with environmentally friendly detergent to remove dirt, mildew, moss and stains

• Driveways & walkways cleaned upon request

• Delicate areas are to be hand-washed

• House is given adequate time to dry

• Scraping and sanding of all loose paint throughout areas to be painted

• Feather sand rough edges as necessary for a more consistent and clean look

• Glossy areas are scuff-sanded to ensure that finish coat bonds strongly

• Apply specialty bonding primer to all applicable surfaces

• Apply exterior primer to all bare wood

• Caulking all splits in wood and windows for proper insulation and water damage prevention

 

Exterior Protection:
Masking all windows and doors, protection of shrubbery, landscaping and walkways.

 

Prime/Paint Siding and Trim:
We will spray, roll and/or hand brush work with a minimum of two coats as indicated and necessary.

 

Clean Up / Final Inspection:
Our clean up and final inspection will set us apart from other Connecticut Painting contractors and companies.

 

Performed each day and upon completion of the job:
Plant beds cleaned and paint chips removed.  Outdoor fixtures & furniture will be put back.  All trash will be removed from the jobsite.  At the end of the project everything will be as clean to the homeowners complete satisfaction.

Final Inspection:
Our painting crew will do a final inspection on their own to ensure that all work and cleanup is complete.

We will then ask the customer to inspect the job and any areas of concern will be noted and promptly taken care of. Touch-up paint is labeled & left with the customer.